PRG Best Boy 4000 User Manual - Manual (Page 38)

30 BEST BOY 4000 ® SPOT LUMINAIRE USER MANUAL
MENU SYSTEM
Using the Menu Touchscreen
The menu system is a set of software screens used to configure, address, report status, and test the luminaire. These
functions are controlled at the Menu Touchscreen as shown in Figure 3-1.
Figure 3-1: Menu Touchscreen
Color Codes
The menu panels are color coded as follows:
+ Blue - function control panels. These are configurable functions which will open a sub-menu when touched.
+ Green - informational panels. These display status info and will not open further menus when touched.
+ Red - important control panels. These are configurable functions which will open a sub-menu when touched.
Activating these functions will affect important luminaire settings.
Navigation
To navigate the menus, press the blue or red areas of the touchscreen.
Screen Saver Mode
The menu will automatically return to the Home screen, from a sub-menu, if inactive for 45 seconds. The display will
go into screen saver mode (backlight off) if inactive for five minutes.
The menu will automatically jump to the Status screen and wake up the display when a mechanism status changes
(error, calibration, etc.).
Bypass Calibration
If the menu screen is touched (in the center) and held during startup, the luminaire will present a menu that provides
the option to bypass calibration. This feature allows the luminaire to skip the calibration sequence so that it can be
powered up in the case for configuration purposes. (Refer to
"Bypassing Calibration" on page 24.)
Wake Switch
The Best Boy 4000 Luminaire contains an on-board
battery so that it can be addressed and configured
without being connected to main power. A Battery
Wake Switch, located near the menu touchscreen,
can be used to access the menu system as required.
+ Press the switch once to bring up the power
down menu.
+ Press and hold the switch to force a power
down.
100 -240 VAC
12A Max
50 / 60 Hz IN
DMX
THRU
ETHERNET
AC IN
COMM
WAKE
Menu Touchscreen -
Used to configure luminaire address
and other options. Also, provides
status information and testing.
COMM
WAKE
Wake Switch
Figure 3-2: Wake Switch