Home screen – PRG Best Boy 4000 User Manual User Manual
Page 40
32
BEST BOY 4000
®
SPOT LUMINAIRE USER MANUAL
Home Screen
The Home screen consists of several sections (referred to as "panels")
which provide status and configuration information. Pressing the panels
on the touchscreen will open the applicable sub-menus.
Address (#)
The large number (046 in the example screen) is the current DMX
address of the luminaire.
Press panel to bring up the numeric keypad for editing.
LAMP
+
Lamp Status - displays lamp on/off status, hours, and
temperatures. The lamp icon color indicates status of lamp: off = gray icon, on = yellow icon (shown in example at
right), error = red icon.
+
Lamp Hours - displays total lamp hours. Lamp hours are shown in green if under threshold, yellow at 650 hours,
and red at 750 hours.
It is mandatory that the lamp be changed before 750 hours.
+
Temperatures - displays luminaire head temperatures. The temperatures are shown in green if under limit, yellow
if close to the limit, and red if over the limit.
Press panel to open
.
CONFIG
Press panel to open
COMM
+
Comm - displays currently active input protocol: ETH (green), DMX (green) or NONE (red).
Press panel to open
STATUS
+
Status - displays fixture status: CAL (yellow), OK (green), or ERR (red).
Press panel to open
.
TEST
Press panel to open
INFO
+
Run Time - displays current software version and run time in
hours:minutes
format.
Press panel to open
Home Screen