PRG Best Boy 4000 User Manual - Manual (Page 41)

BEST BOY 4000 ® SPOT LUMINAIRE USER MANUAL 33
Lamp Screen
+ Start/Douse - displays current lamp status and power setting.
Press START/DOUSE to bring up Yes/No options (depending on
current lamp state).
+ Lamp Power - displays lamp power status as a percentage.
+ Lamp Hours- displays total lamp hours. Lamp hours are shown in
green if under threshold, yellow at 650 hours, and red at 750 hours.
It is mandatory that the lamp be changed before 750 hours. Press
to bring up Reset Lamp Hours Yes/No options.
+ Strikes - displays number of times the lamp has been struck. Press
to bring up Reset Lamp Hours Yes/No options.
+ Power On - sets option to strike lamp automatically upon power up. Press to bring up Wait/Start options.
+ Temp - displays temperatures in Celsius and Fahrenheit. The temperature is shown in green if under limit, yellow
at 80°C, and red at 90°C. At 90°C the lamp will douse.
+ Fans - displays fan status as OK if fan is running, or ERR (red) if fan is not running.
Press (X) to return to Home Screen .
Configuration Screen
+ DMX Address - displays current DMX512 address. Press to bring
up numeric keypad for inputing the address.
+ Display - configures orientation of the Menu Touchscreen. Press to
bring up Auto/Up/Down options.
+ Universe - displays current universe. Press to bring up alpha
keypad or numeric keypad (based on universe format selection).
+ Universe Format - displays alpha/numeric universe format. Press to
bring up Alpha/Numeric options.
+ Enable Shutters - displays current frame setting. Press to bring up
Enable/Disable options.
+ Pan/Tilt - displays summary of pan/tilt settings:
lock = pan or tilt is locked.*
swap = pan/tilt is swapped.
invert = pan or tilt is inverted.
free = "free" control is enabled (for operating fixture as a follow spot).
Press to bring up
Pan/Tilt Screen .
+ Zoom Fast/Focus - option which allow the zoom to move as fast as possible (Fast), or to move a little slower and
retain focus while zooming (In Focus). Press to bring up Focus/Fast options.
+ Reset Defaults - resets all configuration settings and address to default values. Press to bring up "Reset All
Defaults" Yes/No options. Default settings are as follows:
Press (X) to return to Home Screen .
* When Pan and/or Tilt are locked, it prevents the fixture from moving when the power is reset. For example, if a fixture is
placed within a piece of scenery that could interfere with Pan and Tilt calibration, they can be locked so that only the
internal mechanisms calibrate.
- Address: 001
- Universe: A
- Universe Setting: alpha
- P/T: unlocked
- P/T: standard
(not inverted or swapped)
- Lamp Power Up: wait
- Zoom: in focus
- Display: auto
Lamp Screen
Config Screen