Toa HX-7W-WP - Manual (Page 14)

14
10. SAFETy WIRE INSTALLATION
Be sure to always use safety wire when installing speaker
systems.
Note
Safety wires, shackles, and other suspension parts are not
supplied with the speaker systems, and must be prepared
separately.
[Wall Mounting Example]
In this example, the optional HY-VM7B and
HY-WM7B brackets are used.
Weight: 39.8 kg (87.74 lb)
Wall
Make as short as
possible so as not
to slacken.
Rear angle bar
Shackle
Safety wire
Be sure to follow all instructions regarding safety wire
installation. If not correctly followed, speakers could fall,
potentially resulting in personal injury.
• Use safety wire that is strong enough to suspend the
full weight of the components to be installed.
• Attach a shackle to the rear angle bar and install
suspension bolts to the wall or ceiling as shown in the
figure at right.
• Only install speaker systems in locations capable of
structurally supporting the weight of the speakers and
their mounting brackets.
WARNING
Note
Attach at least 2 safety wires to the shackle,
then secure them to the wall as shown above.