Toa HX-7W-WP - Manual (Page 17)

17
12. COmBINATION WITH THE mATCHING TRANSFORmER
Using the optional MT-200 Matching Transformer allows the speaker system to be connected to a high-
impedance amplifier output. This matching transformer is best for use when the distance between the amplifier
and speaker is very long, or when multiple speaker systems are parallel-connected to a single amplifier.
The MT-200 Matching Transformer can be mounted on the HX-7 Series Speaker System using the HY-MT7
Matching Transformer Adapter.
Regarding the procedure for mounting the transformer on the speaker, refer to the instruction manual supplied
with the MT-200 and the installation manual supplied with the HY-MT7.
13. SPECIFICATIONS
Model No. HX-7B HX-7W
Enclosure Bass-reflex type
Power Handling
Capacity
Continuous pink noise: 250 W (IEC60268-5: 350 W)
Continuous program: 750 W
Rated Impedance 8 Ω
Sensitivity 100 dB (1 W, 1 m)
Frequency Response 75 Hz – 20 kHz
Crossover Frequency 1.7 kHz
Directivity Angle Horizontal: 100º
Vertical : Depending on directivity angle mode
Speaker Component Low frequency : 13 cm (5.5") cone-type x 8
High frequency: Wave front control horn with compression driver x 4
Input Terminal Speakon NL4MP x 2 and M4 screw terminal,
distance between barriers: 9 mm (0.35")
Finish Enclosure Polypropylene, black Polypropylene, white
Punched net Surface-treated steel plate, black,
paint
Surface-treated steel plate, white,
paint
Suspension
bracket
Steel plate, t 3.0, black, paint Steel plate, t 3.0, white, paint
Dimensions 497 (w) x 664 (h) x 274 (d) mm (19.57" x 26.14" x 10.79")
Weight 30 kg (66.14 lb)
Note: The design and specifications are subject to change without notice for improvement.
• Accessories
Suspension bracket (L, R)* 1 ............................................. 1 each
Hex head bolt M6 x 20 with spring and plain washers ............. 4
* 1 Suspension bracket L and R are symmetrical to each other.
• Optional products
[HX-7B]
Matching transformer: MT-200* 2
Matching transformer adapter: HY-MT7
Speaker mounting bracket: HY-60DB, HY-CN7B, HY-PF7B, HY-VM7B, HY-WM7B* 3 , HY-C0801* 3
Speaker stand adapter: HY-ST7
[HX-7W]
Matching transformer: MT-200* 2
Matching transformer adapter: HY-MT7
Speaker mounting bracket: HY-60DW, HY-CN7W, HY-PF7W, HY-VM7W, HY-WM7W* 4 , HY-C0801W* 4
Speaker stand adapter: HY-ST7
* 2 HY-MT7 Matching Transformer Adapter is separately required.
* 3 HY-VM7B Speaker Rigging Bracket is separately required.
* 4 HY-VM7W Speaker Rigging Bracket is separately required.