TYREDOG TD-2300A-X10 - Manual (Page 28)

TD-2300A Series V1.0 26
Threshold Settings
In the Threshold of Alarm settings menu, you can set the following values.
Low Pressure Alarm - Set value for Low Pressure Alarm Warning
High Pressure Alarm - Set value for High Pressure Alarm Warning
High Temperature Alarm - Set value for High Temperature Alarm Warning
These settings can either be applied per axle or for all tyres at once.
If you wish to change any Threshold settings, please refer below.
2) Low Pressure value - Simply use the Mute Button to Increase and the
Temperature Button to Decrease the Low Pressure value.
Press the Backlight Button to go to High Pressure setting.
High Pressure value - Simply use the Mute Button to Increase and the
Temperature Button to Decrease the High Pressure value.
Press the Backlight Button to go to High Temperature setting.
High Pressure value - Simply use the Mute Button to Increase and the
Temperature Button to Decrease the High Pressure value.
Press the Backlight Button to go the Low Pressure setting for the next
axle or to save the new values to the Relay.
Threshold of
Alarm
ESC
A
B
C
100 PSI
1) Press and hold the Mute Button for 3 seconds or until the Menu Screen
appears. Use the Mute Button to select Threshold of Alarm Menu then
press the Backlight Button to enter Threshold of Alarm Settings.