TYREDOG TD-2300A-X10 - Manual (Page 44)

TD-2300A Series V1.0 42
TroubleShooting Continued..
2) All Sensors from 1 of the Relays are Offline / Relay Offline.
What can I do?
If All of your sensors from 1 Relay are Offline, this generally means that
the Relay hasn’t connected to the Monitor. (Relay has no Power)
This can be determined by checking the Relay status Symbol. If a ‘X’ is
shown, this means there is definitely no connection.
Please check the following:
If the Relay is powered by 4 x AA Batteries, please replace with new Bat-
teries and test again. (Also check Batteries are inserted the correct way)
If the Relay is hardwired, please check that the Relay is getting power.
You can do this by making sure the D.C. plug is still plugged in properly
and if a fuse was installed, check that the fuse hasn’t blown.
Once you are sure that the Relay is getting power and if it still won’t con-
nect to the Monitor, try resetting/programming the Relay. Refer Page #31.
If none of these recommendations fix the problem then please contact
your authorised Tyredog dealer.
128 128
128 128
128
128
128
128
128
128
128
128
128
128
128
128
128 128
128
128
128
128
128
PSI
A B H C
Example Shows all Sensors from 1 Relay are Offline