TYREDOG TD-2300A-X10 - Manual (Page 35)

TD-2300A Series V1.0 33
Add new Sensor (LEARNABLE)
In the Add new Sensor menu, you can program new / replacement
LEARNABLE sensors.
You cannot re-program old sensors back in or sensors from another TD-
2300A-X Series Kit. They must be LEARNABLE type sensors only.
Replacement LEARNABLE sensors can be purchased through your au-
thorised Tyredog Dealer or online at www.tyredog.com.au.
When ordering replacement LEARNABLE sensors, you must order the
correct wheel position. (Which is marked on your sensor Cap)
Please refer below for the LEARNABLE sensor Part Numbers:
P/N POSITION
TD-SN-2300A-X1 Wheel 1 (433Mhz)
TD-SN-2300A-X2 Wheel 2 (433Mhz)
TD-SN-2300A-X3 Wheel 3 (433Mhz)
TD-SN-2300A-X4 Wheel 4 (433Mhz)
TD-SN-2300A-X5 Wheel 5 (433Mhz)
TD-SN-2300A-X6 Wheel 6 (433Mhz)
TD-SN-2300A-X7 Wheel 7 (433Mhz)
TD-SN-2300A-X8 Wheel 8 (433Mhz)
TD-SN-2300A-X9 Wheel 9 (433Mhz)
TD-SN-2300A-X10 Wheel 10 (433Mhz)
TD-SN-2300A-X11 Wheel 11 (433Mhz)
TD-SN-2300A-X12 Wheel 12 (433Mhz)