Chapter 8: tools and supplies needed, Tools and supplies needed, 12 tools and supplies needed – Dialogic SS7G21 User Manual
Page 47
47
Dialogic
®
SS7G21 and SS7G22 Signaling Servers Hardware Manual Issue 7
Chapter 8: Tools and Supplies Needed
Procedures in Part II of this manual require the following tools and supplies (see
):
•
Jumper-removal tool or needle-nosed pliers
•
Small flat-bladed screwdriver
•
Phillips (cross-head) screwdriver (#2)
•
Pen or pencil
•
Anti-static wrist strap and conductive foam pad (recommended)
•
Cable tie
Figure 12. Tools and Supplies Needed
Note: Blue-colored items (such as handles, buttons, and screws) represent service touch points.
Remove power from system before servicing these components. Green-colored items (such as
handles, levers, and buttons) represent hot-pluggable components.
Record the model and serial number of the product, all installed options, and any other pertinent information
specific to the product.
A list of part numbers of available spare parts is provided in