CUE controlCUE - Manual (Page 12)

12
controlCUE Controllers | Connecting
© CUE, a.s. | All Rights Reserved.
PWR IN
The unit requires power 24 VDC from an external power supply.
Power consumption
▪ controlCUE-one 12 W
▪ controlCUE-two 14 W
The standard power adapter is delivered with the unit. Attach the 2-pin connector of the power supply unit to
the PWR IN connector located on the rear panel and attach power cable to a power outlet.
L G R L G R S G S G S G S G + G 1 2 3 4 5 1 2 3 4 5 S S S S G NC C NO NC C NO + G
PWR IN RELAY GENERAL I/O SERIAL IR/SERIAL AUDIO LINE
CUEnet (LAN)
default IP address
192.168.1.127
IN OUT 1 2 3 4 1 2 1 2 3 4 G 1 2 24 VDC F. D.
Warning: Use any unit only with the power adapter supplied in the product package. Using another power
supply may damage the unit.
Connector pin out
PWR IN
2-pin 3.5 mm Pin Description
+ G
+ Power +24 VDC
G Ground