CUE controlCUE - Manual (Page 20)

20
controlCUE Controllers | Upload User Application
© CUE, a.s. | All Rights Reserved.
Using Admin Web
Steps are
1. Run Cue Visual Composer on your PC.
2. Open project in Cue Visual Composer. It’s necessary to have appropriate controller properly inserted and
configured.
3. Use tool bar button Final to open Upload and Export Application dialog box.
Button Final
Export As Application Files ...
4. Be sure your controller is checked.
5. Use button Export As... and select Application Files ...to export application and store it in file *.cvca.
6. Connect controller to your computer as described in chapter Connecting / CUEnet (LAN).
7. Run the Internet browser on your PC and type in the same controller IP address as you see in Cue Visual
Composer project, window Properties / IP address.
8. Admin Web is shown.
9. Go to page System and check current firmware version. In case there is no actual controller firmware
version, upload firmware version that corresponds to firmware version in the Cue Visual Composer
project.
10. Go to page Applications and upload application file *.cvca.
11. Start uploaded application using button Start.