Digital Alert Systems MultiPlayer - Manual (Page 4)

Digital Alert Systems
MultiPlayer Quick Start Guide
Revision 4.0 Page 4 of 13
Audio Port Configuration
Units are shipped preset for AES playback on all ports. If all stations are using AES playback skip to Wiring the MultiPlayer.
The main point: Ports are assigned a channel, and channels are linked to a station in the DASDEC MultiStation interface.
Each MultiPlayer’s audio input/output ports can be configured to conform to the following signal types:
1. AES digital with input(stereo pair)-AES3
2. AES digital without input(stereo pair)-ORIG
3. Analog mono - ANALOG
4. Analog stereo - ANALOG + SLAVE combination
The different channels created by the MultiPlayer are linked to the different MultiStation stations in the DASDEC web
interface (do not confuse channels with ports). These rules and guidelines are explained below by use of screenshots from the
MultiPlayer web interface.
The screen shot in Figure 5 below is the home webpage for the MultiPlayer. To get to this page just type the IP address of the
MultiPlayer into a network connected web browser. Click Audio Port Configuration text link on the left to navigate to the Audio
Port Configuration page.
Figure 5 MultiPlayer Home page