Digital Alert Systems MultiPlayer - Manual (Page 7)

Digital Alert Systems
MultiPlayer Quick Start Guide
Revision 4.0 Page 7 of 13
Wiring the MultiPlayer
Program Audio
Wiring the MultiPlayer is very straightforward. Audio connections are made for each of stations through the ports. Recall
Under DASDEC MultiStation control Station 1 is hardcoded to MultiPlayer Port 1. Station 2 is hardcoded to MultiPlayer Port 2
and so on with Station 5 is tied to the DASDEC internal audio program switch(es) as depicted in Figure 1.
Figure 6 DASDEC and MultiPlayer audio program wiring configuration
The MultiPlayer features automatic program bypass in the event of power fail. In this way the program input will automatically be
routed to the program output should power be loss or by command from the DASDEC.
1. For a digital or mono audio connection, make the program audio connections as follows
MultiPlayer Connection
DASDEC MultiStation Number
(Order in the MultiStation pull-down menu after Base Station)
Setup > Decoder > Forwarding
Port 1 DASDEC MultiStation 1
Port 2 DASDEC MultiStation 2
Port 3 DASDEC MultiStation 3
Port 4 DASDEC MultiStation 4
MASTER
DASDEC MultiStation 5
(DASDEC AES output loops through the MultiPlayer’s MASTER
port to provide “live” audio during an EAN)