Dimension One Spas 2000 Model - Manual (Page 5)

3
2000 Owner’s Manual
Grounding, or the symbol * is located inside the supply terminal
box or compartment. To reduce the risk of electric shock, this
terminal must be connected to the grounding means provided in the
electric supply service panel with a continuous copper wire
equivalent in size to the circuit conductors supplying this equipment.
* IEC Publication 417, Symbol 5019.
c) At least two lugs marked “BONDING LUGS” are provided on the
external surface or on the inside of the supply terminal
box/compartment. To reduce the risk of electric shock, connect the
local common bonding grid in the area of the hot tub or spa to these
terminals with an insulated or bare copper conductor not smaller
than No. 6 AWG.
d) All field-installed metal components such as rails, ladders, drains or
other similar hardware within 3 M of the spa or hot tub shall be
bonded to the equipment grounding bus with copper conductors not
smaller than No. 6 AWG.
e)
SAVE THESE INSTRUCTIONS.
WARNING : Children should not use spas or hot tubs without adult
supervision.
AVERTISSEMENT: NE PAS LAISSER LES ENFANTS UTILISER
UNE CUVE DE RELAXATION SANS SURVEILLANCE.
WARNING : Do not use spas or hot tubs unless all suction guards are
installed to prevent body and hair entrapment.
AVERTISSEMENT:
POUR ÉVITER QUE LES CHEVEUX OU UNE
PARTIE DU CORPS PUISSENT ÊTRE ASPIRÉS, NE PAS UTILISER
UNE CUVE DE RELAXATION SI LES GRILLES DE PRISE
D’ASPIRATION NE SONT PAS TOUTES EN PLACE.
WARNING: People using medications and/or having adverse medical
history should consult a physician before using a spa or hot tub.
AVERTISSEMENT: LES PERSONNES QUI PRENNENT DES
MÉDICAMENTS OU ONT DES PROBLÈMES DE SANTÉ