Q-See QSDF8204 - Manual (Page 12)

QSDF8204 Digital Video Recorder User Manual
12
3.2 Main Menu Setting
There is an administrator setup in the DVR. The administrator has control
over all settings. The username is "Admin", and default password is "123456".
Steps of entering the Main Menu are:
Notice
STEP1 Press the "Menu" button, input username and password in the
Login interface (as Fig. 3.1), and then you will see the Main Menu (as Fig.
3.2).
: The instructions in the examples are the steps using the Remote Control. If using
a mouse the operation may be easier, you would follow the instructions in dialogue boxes and
navigate through menu items. If using the front panel buttons you cannot control PTZ
cameras, but the other operations are the same as the remote control.
STEP2 Move the cursor, and the selected items will be highlighted in
yellow
STEP3
Press "Enter" key to enter the sub-menu, and press "Menu" key to
get back to Main Menu
The structure of the main menu is shown in Fig 3.3.
MENU
LIVE CONFIG
RECORD CONFIG
ALARM CONFIG
PTZ CONFIG
BASIC CONFIG
USER CONFIG
NETWORK
MANAGER TOOLS
MOTION ALARM
SENSOR ALARM
OTHER ALARM
BASIC CONFIG
IP CONFIG
DDNS CONFIG
DISK MANAGEMENT
SYSTEM LOG
SYSTEM INFO
UPDATE FIRMWARE
LOAD DEFAULT
CLEAR ALARM OUT
SHUTDOWN SYSTEM
Fig 3.3 Structure of Main Menu
Fig 3.2 Main Fig 3.1 Login