Q-See QSDF8204 - Manual (Page 45)

QSDF8204 Digital Video Recorder User Manual
45
1. Parameter Setting
This setting is the same as ‘3.2.3 Record Configuration’ of the DVR. If you
change it on Network Client, the DVR will change along with it.
2. Schedule Record
The default value of Schedule Record is not active.
STEP1 Click the check box of the Schedule Record, and it will be active.
The default schedule time is every day.
STEP2
Click "Set Schedule" button, and Schedule Configuration window
will pop up as Fig 4.17 Schedule Configuration.
Eraser
Add
Fig 4.17 Schedule Configuration
STEP3 Click "Eraser" button and click on the weekday schedule to delete
the time; Click "Add" button and click on the weekday schedule to add the
time.
4.4.4 Alarm Configuration
Click button in Remote Configuration, and a drop down menu will
appear. There is the Motion Alarm window, Sensor Alarm window and Other
Alarm window. The setting is the same as ‘3.2.4 Alarm Configuration’ of the
DVR. If you change it here, the DVR will change along with it.
4.4.5 Network Configuration
Click button to change the video quality of Network Client.
4.4.6 User Configuration
The setting of User Configuration window is the same as ‘3.2.6 User
Configuration’ of the DVR. The added users in one server can login to the
Server and Client.
4.4.7 Management Tools
Click button in Remote Configuration, and a drop down menu will
appear. There is the Disk Management window, Software Update window,
Load Default window, System Information window and System Log window.