Q-See QSDF8204 - Manual (Page 16)

QSDF8204 Digital Video Recorder User Manual
16
3. PRERECORD TIME
Prerecord time refers to the amount of time recorded from memory before the
alarm was triggered. There are two options: 5 seconds and 10 seconds.
4. TIME STAMP
If selected, record time will be displayed on the bottom of the screen at
playback
5. CHANNEL
STEP1 Move the cursor to the item.
STEP2 Press "Enter" key to switch the channel and select.
6. VIDEO QUALITY
There are five options: lowest, lower, medium, higher and highest. The higher
the picture quality, the clearer the image is, but more hard drive space will be
taken up.
7. AUDIO
If you check "AUDIO", DVR will record audio with video recording. Otherwise,
it will not record audio.
Notice:
•
The default setting is that Audio input1 matches channel1 and Audio input2
matches channel2.
8. SCHEDULE RECORD
•
When playing back the record, please press "AUDIO" button to switch the sound
to the corresponding channel.
Schedule Record Setup is shown as Fig. 3.8.
Fig 3.8 Schedule Setup
STEP1 Move the cursor to "SCHEDULE RECORD" option
STEP2 Check "SCHEDULE RECORD", and the “Setup” window will pop
up.
STEP3
Press "Setup" to enter the Schedule Setup menu.
Press "ESC" button on the front panel to get back to upper menu.
STEP4 In the Schedule Setup menu, move the cursor to select a day, and
check “whole day” if you want to record all of the time.
STEP5
If you only want to record certain time periods press "Enter" key to
set up time.
STEP6
Press "+" and "-" buttons on the front panel to modify the time.
Notice: When you use the mouse, you need roll the middle wheel to modify the time.