Q-See QSDF8204 - Manual (Page 19)

QSDF8204 Digital Video Recorder User Manual
19
Fig 3.11 Detection Area Setup
Sub-steps for manually selecting the detection area are described below:
1. In the Area Setup submenu, choose "CUSTOM" option.
2. Press "Enter" key to confirm the operation.
3. Press "
Up", "Down", "L eft" and "R ight" buttons to choose the
area which needs to be detected
4.
Press "Enter" key to select or cancel the area.
5. Press "Esc" button to confirm the option and exit "CUSTOM"
option.
STEP3 Press "BACK" option to go back the Motion Alarm Configuration
menu.
Notice
9. COPY TO
: If continuous recording mode, manual record and alarm record are activated at
the same time. The alarm events can be found in Search by Event”, please refer to the ‘3.3.2
Search’ function in ‘3 Search by Event’.
Use this option to copy the settings of this channel to any other selected
channel.
SENSOR ALARM
Sensor alarm submenu is shown as Fig. 3.12. Every Sensor matches one or
more channels.
Fig 3.12 Sensor Alarm Configuration