Digimerge DHU104 - Manual (Page 34)

26
System Menu
System Menu
The System Setting controls contain:
DATE/TIME - Date and Time controls for
the system.
NETWORK - Network and remote access
controls.
MAIL - Mail setup
USER MANAGEMENT - Controls for
system users.
SYSTEM MANAGEMENT - System
specific settings and controls
CONTROL DEVICE - Settings for an
external control device (e.g. a PTZ camera)
not included with the system
DATE/TIME
• Date/Time - Sets the current system
Date and Time.*
• Date Format - Sets the Date Display
format (MM-DD-YYYY,
YYYY-MM-DD, etc.).
• Time Format - Sets the Time Display
format to either 12 or 24 hour display.
• Network Time Server Setup -
Synchronizes the system to the specified remote time server. Select the SYNC button to
connect to the remote server and synchronize the time.
• Timezone Setup - Selections for the local Time Zone (i.e. EST, CST, PST). The DST (Daylight
Savings Time) can be set to ON/OFF.
* NOTE: If the Date/TIme is set into the past, a message will appear warning that
Overlapped date(s) will be erased.
** MAKE SURE THAT THE DATE AND TIME ARE SET PRIOR TO RECORDING! **