Press the enter key on the front panel, Formatting the new hard drive – Digimerge DHU104 User Manual
Page 64
Advertising
56
Appendix 7: Replacing the Hard Drive
Formatting the New Hard Drive
The new hard drive must be formatted.
If a new HARD DRIVE is detected, the
system will prompt you to FORMAT the
drive. If you do not choose to format the
HARD DRIVE, the drive will not be
detected by the system.
To format the new hard drive:
1. From the system prompt, press the
Right Arrow key on the front panel to
select YES.
2. Press
the
Enter key on the front panel.
Note: If you choose to FORMAT a drive
in this way, the drive will no longer be
readable by a regular PC without using the HARD DRIVE VIEWER software included on the
CD provided with this unit.
NOTE: Do NOT turn off the System while the drive is formatting. This can cause problems with
the Hard Drive.
Advertising