Lencore Spectra i.Net: Sound Manager - Manual (Page 12)

Click Submit to save the changes you have made to this Web page. Note that all
fields marked with an asterisk require a reboot before the new values take full
effect. Click Reset to leave all fields unchanged. If you changed the IP address,
you will have to change your computer's TCP/IP settings to place it on the same
subnet; if you want to continue to have Web access. Click Help on the Web page
for more information about the fields on this screen
AFTER SUBMITTING NEW IP ADDRESS YOU MUST REBOOT I.LON.
GO TO SETUP TAB AGAIN AND SELECT REBOOT.
NOTE -REBOOT TAKES ABOUT 2 MINUTES TO COMPLETE.
YOU WILL LIKELY NEED TO EXIT
AND RE-ENTER I.LON.
OPTIONAL STEP
If the Sound Manager will be accessed remotely (off-site):
The Sound Manager for the installed site can be used from any Internet connection
worldwide.
To enable this function, the site facility manager should request that their IT person
port the IP address to the outside, securely outside the firewall. The end user’s IT
professional should be the only person to set this up for security reasons.
For more information on the web user interface, please contact Lencore.
The information contained herein is proprietary to Lencore Acoustics Corp. and copyright protected. No part of this manual can be copied,
used or distributed without prior authorization from Lencore Acoustics Corp. © Copyright 2010 9
V 1.9