Lencore Spectra i.Net: Sound Manager User Manual
Page 16
8. Upon exiting the Sound Manager if you need to reset your web settings, follow
these instructions:
1. Start button
2. Click “connect to” or control panel
3. Click network & internet connections
4. Click “show all connections or network connections”
5. Local area connection should pop up
6. Right click on LAC
7. Go to “properties”
8. Go to the window in the pop-up box titled “This connection uses the following items:”
9. Scroll down to the last…”protocol (TCP/IP)” – click this
10. Click “properties”
11. Click the button that says “obtain an IP address automatically”
12. Press Ok/Close
The information contained herein is proprietary to Lencore Acoustics Corp. and copyright protected. No part of this manual can be copied,
used or distributed without prior authorization from Lencore Acoustics Corp. © Copyright 2010
13
V 1.9