Lencore Spectra i.Net: Sound Manager - Manual (Page 37)

2. Click on “Add new” at the top right portion of the Scheduler section as shown
below in Figure 32 to Add new schedule.
Figure 32
3. Enter the Schedule name into the popup window and click “Enter” to create
as shown in Figure 33 below.
Figure 33
4. Notice the new tab created for the new Schedule created. See Figure 34.
5. Check the days of the week you would like to set to this Schedule, and enter
the time of the day you want this Schedule to begin. Do this by entering the
time in the “Starts At:” box shown in Figure 34.
6. Adjust the Volume level by sliding the arrow left or right or entering the
desired setting in the box provided next to the Volume control slider shown in
Figure 34.
The information contained herein is proprietary to Lencore Acoustics Corp. and copyright protected. No part of this manual can be copied,
used or distributed without prior authorization from Lencore Acoustics Corp. © Copyright 2010 34
V 1.9