Dialogic Mitel SX-2000 - Manual (Page 17)

Dialogic ® 4000 Media Gateway Series Integration Note
17
Apply the address map inbound rule on the inbound route as follows:
5.2.5 Restarting the Dialogic
®
Diva
®
SIPcontrol™ Software
Note: A restart of the Diva SIPcontrol software service is needed only if the setting under
Network Interface
is changed.
Save the configuration and restart the Diva SIPcontrol software service for the changes to take effect. To do so,
click
Service Status on the left hand side of the main configuration page, and then click Restart
SIPcontrol . The Last operation log will show that the service has been stopped and started again.