Dialogic Mitel SX-2000 - Manual (Page 47)

Dialogic ® 4000 Media Gateway Series Integration Note
47
•
Under Line Coding , select B8ZS .
• Under Framing , select ESF .
•
Under Line Build Out , select 0 dB .
•
Under Invert Data , select Disable .
• Click Update and Close .
Step 4: Configure the Incoming Call Characteristics as follows:
Select
Config > Incoming Call Characteristics .
•
Set PRI link number* to the link number that the T1 QSIG is installed.
• Set Trunks* to 1-23 .
•
Set DDI Delivery to Yes .
•
Set CPN Delivery to Yes .
• Click Update and Close .