Dialogic Mitel SX-2000 - Manual (Page 23)

Dialogic ® 4000 Media Gateway Series Integration Note
23
•
Select the Cabinet number, the Shelf number, and the Slot number in which the T1 Q.SIG line is being
installed.
•
Set Programmed Card Type to Universal T1 and press [ENTER].
• Press [ESC] then [4] to commit to changes and [ESC] then [1] to confirm the changes.
• Press [ESC] then [Q] to return to the System Forms menu.
Step 4: In the System Forms menu, select Class Of Service Options Assignment and press [ESC]
then [2] to edit the Class Of Service Options Assignment form.
Configure the form as follows: