Visara UCT-L - Manual (Page 124)

6-62 707108-001
UCT-L User’s Manual
Setting up a remote host as a 3270 terminal
To setup a remote host:
1. Click the button in the lower left-hand corner of the screen. The application
menu will appear.
2. Click VT3270. The main VT3270 screen will appear with two menu options, Setup
and Session.
3. Click Setup.
4. Click Communications from the Setup menu. This screen will appear:
• Connection Type – Select LAN to configure a VT3270 LAN session. Select Serial
to configure a TN3287 Serial session. (Serial port not available on 300.)
• Session Name – Enter the name to be displayed in the window title.
• Host – Enter the Internet address of the VT3270 server to which you wish to connect,
for example, 255.255.XXX.XXX.
• Port – If the host requires that a port number (other than port 23) be specified when
connecting, select the port number using the up and down arrows or by typing the
port in directly.
• Auto Connect – Select to auto connect at program start and to reconnect
automatically if disconnected by the server.
Click OK to save changes and close Communications Setup, or Cancel to close and
discard any changes.