Picture in picture, Picture in picture (pip) – Loewe L 37 Full-HD+ 100 User Manual

Page 30

Advertising
background image

- 30

Picture in Picture (PIP)

The concurrent display of two different images is referred to as Picture
in Picture.
➠ The coloured buttons do not work as described below for TV sets

with MHEG-5 software, but they operate as described on page 35
(Digital Teletext).

➠ A concurrent display of two HDTV signals is not possible.

➠ A concurrent display of two coded stations is not possible.

➠ Picture change and station selection is restricted during recording.

➠ PIP mode is restricted to AV-PIP (one TV station and one AV source). If

a satellite tuner is upgraded, PIP mode from digital satellite picture and
analogue picture via cable TV or house antenna is possible additionally.

Your TV set distinguishes between two PIP displays:
Split Screen In this case screen is divided in the middle and the addi-

tonal PIP image is shown on the right side of the screen.
Both images are compressed horizontally and each gets
half of the screen.

Small PIP In this case a small PIP image is inserted in the TV picture.

Start and end picture in picture mode

Show/hide PIP.
A green frame indicates that the station selection acts on
the PIP picture. A white frame means that the operation
refers to the main picture. If the frame is blue, the station
scan is active in the PIP picture.
➠ For TV sets with MHEG-5 Software, you switch from

the green bar/frame to the white by using the PIP
key. The next time you press the PIP key, PIP is
switched off.

PIP as freeze picture

➠ The frame is green,

if not, press the green button.

Red button: Freeze picture in PIP on / off.

Swap contents of PIP and main picture

➠ The frame is green,

if not, press the green button.

Yellow button: Swaps contents of TV picture and PIP picture.

Select the PIP picture

➠ The frame is green,

if not, press the green button.

Select the station as usual.

Select the station for the main picture

➠ The frame is white,

if not, press the green button.

Select the station as usual.

Scan station in the PIP

➠ The frame is green,

if not, press the green button.

Blue button: Start Scan stations.

The frame turns blue,
the stations now change automatically.

Blue button: Stop Scan stations.

The frame is green again.

Picture in Picture

; <&=                            ¬
17.00 - 18.30 Flora & Fauna

1 ARD
17.30 - 20.00 Toskana

Advertising
This manual is related to the following products: