Contemporary Research ICE-HE-DXL Display Control Center with Universal Rackmount - Manual (Page 23)

Page | 23 ICE-HE-DXL Display Control Center Product Manual 042021
RKU Universal Rack Mount Kit
All Contemporary Research rack-mountable products will now include a Universal Rack Mounting Kit (RKU). The RKU will allow for mounting
of a single unit or two units side-by-
side in a 19” rack. One Universal Rack Mounting Kit will be included with the purchase of each product
and will include the following parts:
•
Two (2) Short Rack Ears
•
One (1) Long Rack Ear
•
One (1) Center Mount Tie-bar
•
Six (6) 8- 32 x 1/4” Screws
•
Two (2) 4- 40 x 3/16” Screws
2-Across Mounting
When mounting two components in one RU rack space, use the two short rack ears and the tie bar assembly.
Note that older versions of the QDA4-45 and QCA9-33 have solid side panels and should not be mounted next to actively cooled components
with the ventilation holes, as that will block airflow.
1. Check that the enclosures have the tie bar slot.
2. Slide the included tie bar into the side of one unit and attach with one included 4- 40 x 3/16” screw, but do not tighten.
3. Slide the other unit into the tie bar, attach with the second 4- 40 x 3/16” screw, and tighten both screws.
4. Add the rack mounts to the sides using the six 8- 32 x 1/4” screws.
Single Unit Rack Mounting
Attach a long and short rack ear to each side at the front of the unit, using five of the 8- 32 x 1/4” screws.