Marantz PM-10 Stereo 200W Power Amplifier (Black) - Manual (Page 18)

Playback
n Contents
Turning the power on 17
Selecting the input source 17
Adjusting the volume 17
Turning off the sound temporarily (Muting) 18
Adjusting the left and right channel balance 18
Having the display and the illumination lamp off 18
Having the illumination lamp always off 18
Playing CDs 19
Recording 19
.
VOLUME df
REMOTE MODE AMP
MODE/TRIM DISPLAY
INPUT df
MUTE
uip
AMP X
Turning the power on
1
Press X on the main unit to turn the power on.
0
The power indicator lights in blue.
0
The standby indicator blinks in red until the unit is
able to be used.
0
Press X AMP on the remote control unit to turn on power
from standby mode.
0
You can also turn the INPUT SELECTOR on the main unit
when the unit is in standby mode to turn on the power.
n Switching the power to standby
1
Press X AMP on the remote control.
The unit switches to standby mode, and the STANDBY
indicator lights red.
NOTE
0
Power continues to be supplied to some of the circuitry
even when the power is in the standby mode. When
leaving home for long periods of time or when going on
vacation, either press X on the main unit to turn off the
power, or unplug the power cord from the power outlet.
Selecting the input source
1
Use INPUT df to select the input source to be
played back.
The selected input source appears on the display.
0
You can also select the input source by turning INPUT
SELECTOR on the main unit.
Adjusting the volume
1
Use VOLUME df to adjust the volume.
0
You can also adjust the volume by turning VOLUME on the
main unit.
ENGLISH
17