Marantz PM-10 Stereo 200W Power Amplifier (Black) - Manual (Page 29)

Specifications
0
RMS Power output (Simultaneous drive of both channels) : 200 W x 2 (8 Ω/ohms load, 1 kHz, T.H.D. 0.05 %)
400 W x 2 (4 Ω/ohms load, 1 kHz, T.H.D. 0.1 %)
0
Total harmonic distortion
(1 kHz, simultaneous drive of both channels, 100 W, 8 Ω/ohms load) : 0.005 %
0
Frequency response (CD, 1 W, 8 Ω/ohms load) : 5 Hz – 50 kHz ±3 dB
0
Damping factor (8 Ω/ohms load, 20 Hz – 20 kHz) : 500
0
Input sensitivity/Input impedance
PHONO (MC Low) : 280 μV/10 Ω/ohms
PHONO (MC High) : 280 μV/49 Ω/ohms
PHONO (MM) : 2.6 mV/47 kΩ/kohms
BALANCED : 880 mV/40 kΩ/kohms
CD/LINE/RECORDER : 440 mV/20 kΩ/kohms
POWER AMP : 1.5 V/20 kΩ/kohms
0
Maximum allowable PHONO input level (1 kHz)
MC : 8 mV
MM : 80 mV
0
RIAA deviation (20 Hz – 20 kHz) : ±0.5 dB
0
S/N (IHF-A, 8 Ω/ohms load)
PHONO (MC) : 76 dB (0.5 mV Input, 1 W Output)
PHONO (MM) : 88 dB (5 mV Input, 1 W Output)
BALANCED : 111 dB (4 V Input, Rated output)
CD/LINE/RECORDER : 111 dB (2 V Input, Rated output)
0
Power requirement : AC 120 V, 60 Hz
0
Power consumption : 270 W
0
Power consumption in standby mode : 0.3 W
For the purpose of improvement, the specifications and design are subject to change without notice.
ENGLISH
28
Overview
Connections
Playback
Settings
Tips
Appendix