Connectors, P. 45), Connecting the balanced xlr pre out connector – Marantz AV 10 Reference 15.4-Channel Home Theater Preamplifier/Processor User Manual
Page 45
Advertising
n
Connecting the BALANCED XLR PRE OUT connector
When using BALANCED XLR connectors for connection, set the input change switch to “XLR” on Marantz AMP 10.
z
1 When using a single surround back speaker, connect it
to the SURROUND BACK L terminal.
z
2 The output terminals for Height/Ceiling/Dolby Atmos
Enabled speakers vary according to the speaker
combination that you use. For the PRE OUT connector
that connects each Height/Ceiling/Dolby Atmos
Enabled speaker, refer to “Amp Assign” -
“Layout” (
z
2
z
2
z
1
z
2
z
2
z
2
z
2
z
2
z
2
SW4 SW3 SW2 SW1
SR SL
FR FL
C
RHR RHL TMR TML
CH
TS
FHR FHL
FWR FWL
SBL
SBR
Marantz
AMP 10
Marantz
AMP 10
Second unit
45
Advertising