HP LaserJet Enterprise M806x+ Black and White Laser Printer - Manual (Page 60)

4. If you are installing an optional accessory for the first time, at the back of the product remove the
accessory interface cable cover.
5. Connect the finishing accessory interface cable.
6. Connect the product power cord, and then turn on the product.
Step four: Parts return
The following URL provides information on how to return parts to HP for reuse and recycling: Product return
and recycling
NOTE: HP recommends responsible disposal of the defective stapler/stacker.
Step five: Configure the booklet maker in the HP Embedded Web Server (EWS)
● 1: Connect to the EWS
● 2: Configure the Paper Selection feature
● 3: Configure the Sides feature for single or duplex printing
52 Chapter 2 Install and configure the finishing accessories ENWW