Canon EOS R6 Mark II Mirrorless Camera with 24-105mm f/4-7.1 Lens - Manual (Page 1059)

Exposure control
Metering functions under various shooting conditions
Item Still photo shooting Movie recording
Metering sensor 384-zone (24×16) metering using image sensor output signals *1
Metering mode
Evaluative
metering
Yes
Yes
* When faces are detected
Partial metering
Yes
* Approx. 5.9% in the center of the
screen* 3
Spot metering* 2
Yes
* Approx. 3.0% in the center of the
screen* 3
Center-weighted
average
metering
Yes
Yes
* When no faces are detected
* When set to Canon Log 3
Metering brightness range (at room
temperature, ISO 100)
EV –3 to 20 EV –1 to 20
* 1: Same applies when set to [ 1.6x (crop) ].
* 2: Multi-spot metering not available (not supported).
* 3: When set to Full-frame. Values differ when set to 1.6× (crop) or Digital tele-converter.
ISO speed (recommended exposure index) in still photo shooting
Manual ISO speed setting for still photos
ISO speed
Normal ISO speed ISO 100–102400 (in 1/3 or 1-stop increments)
Expanded ISO speed L (equivalent to ISO 50), H (equivalent to ISO 204800)
* When set to [ Highlight tone priority ], the available manual setting range is ISO 200–102400.
* Expanded ISO speeds cannot be set in HDR mode or for HDR shooting (HDR PQ).
Manual ISO speed setting range for still photos
ISO speed range ISO speed
Minimum L (equivalent to ISO 50) to ISO 102400 (in 1-stop increments)
Maximum ISO 100 to H (equivalent to ISO 204800, in 1-stop increments)
ISO Auto setting range for still photos
Auto range ISO speed
Minimum ISO 100–51200 (in 1-stop increments)
Maximum ISO 200–102400 (in 1-stop increments)
1059