Nikon Zfc Mirrorless Camera with 28mm Lens - Manual (Page 496)

Connecting to HDMI devices
496
Option Description
[Ex ternal
recording
control]
Choosing [On] allows camera controls to be used to start and
stop recording when the camera is connected via HDMI to a
third-party recorder that supports the Atomos Open Protocol.
･ External recording control is available with Atomos
SHOGUN, NINJA, and SUMO-series Monitor recorders. For
more information on device features and operation, contact
the manufacturer or refer to the documentation provided
with the recorder.
･ The camera display will turn off automatically when the
time selected for Custom Setting c3 [Power off delay] >
[Standby timer] expires, ending HDMI output. When
recording videos to an external device, select [Standby
timer] and choose [No limit] or a time longer than the
anticipated recording time.
･ An icon will be displayed in the camera monitor when [On]
is selected:
A
is displayed during standby,
B
during
video recording. During recording, check the recorder and
recorder display to ensure that footage is being saved to the
device.
･ Note that selecting [On] may disrupt the footage output to
the device.
D
No HDMI output
If the video frame size and rate is set to 1920×1080 120p, 1920×1080 100p, or
1920×1080 slow-motion, HDMI output is not available.
D
Zoom
If you zoom in on the display during video recording, the video being
recorded will be displayed at 1:1 (100%) on HDMI devices. During video
recording standby, if you set the frame size to 3840 × 2160 and zoom in on
the display, the display on the HDMI devices will be at a frame size of 1920 Ч
1080.