Nikon Zfc Mirrorless Camera with 28mm Lens - Manual (Page 567)

Other compatible accessories
567
A
Powering the camera with the charging AC adapter
･ If [Enable] is selected for [USB power delivery] in the setup menu, the
charging AC adapter will power the camera when the camera is turned
on. For more information, see ““Power delivery” versus “charging”” (
0
417).
･ The battery will not charge while the camera is powered by an outside
source.
A
Computer USB power delivery and battery charging
･ Computers will supply current to power the camera or charge the battery
only when connected via a UC-E25 USB cable (available separately). The
optional UC-E24 USB cable cannot be used for this purpose.
･ Depending on the model and product specifications, some computers
will not supply current to power the camera or charge the battery.
ML-L7 Remote Control
You can operate the camera from the remote control by pairing*
(
0
570) the optional ML-L7 Remote Control with the camera. With this
camera, you can perform the operation in “Remote control part names
and functions (for Z fc)” (
0
568).
* Connecting the camera and remote control via Bluetooth is called
“pairing” here.
･ Only one remote control can be paired per camera. When pairing
another remote control, only the last paired remote control is
enabled.
･ Also see the documentation supplied with the ML-L7 Remote
Control.
D
Notes when using the remote control
The remote control cannot be used in the following cases.
･ When [Airplane mode] in the camera setup menu is set to [Enable]
･ While the camera is connected to and exchanging data with a computer
via USB