Ospeaker selection, Oadjust eq, Ocurve copy – Marantz CINEMA 70s 7.2-Channel Network A/V Receiver User Manual
Page 163: Oset defaults
o
Speaker Selection
Select whether to adjust tones for individual speakers or for all
speakers.
All:
Adjust all speaker tones together.
Left/Right
(Default):
Adjust the left and right speaker tones
together.
Each:
Adjust the tone for each speaker.
o
Adjust EQ
Adjust tonal balance for each frequency band.
1. Select the speaker.
2. Select the adjustment frequency band.
63 Hz
/
125 Hz
/
250 Hz
/
500 Hz
/
1 kHz
/
2 kHz
/
4 kHz
/
8 kHz
/
16 kHz
3. Adjust the level.
–20.0 dB – +6.0 dB (Default: 0.0 dB)
0
Front Dolby and Surround Dolby speakers can only be set when
63 Hz/125 Hz/250 Hz/500 Hz/1 kHz.
o
Curve Copy
Copy the Flat correction curve created in Audyssey
®
Setup.
0
“Curve Copy” is displayed after Audyssey
®
Setup has been performed.
0
“Curve Copy” cannot be used when using headphones.
o
Set Defaults
The “Graphic EQ” settings are returned to the default settings.
163