Marantz CINEMA 70s 7.2-Channel Network A/V Receiver - Manual (Page 213)

ZONE2 Setup
Makes settings for audio playback with ZONE2.
0
Values set for “Volume Limit” and “Power On Volume” are displayed according to
the setting specified for the volume “Scale”. ( v p. 159)
0
This can be set when “Assign Mode” is set to “ZONE2”. ( v p. 189)
o L Ch Level
Adjust the left channel output level.
-12 dB – +12 dB (Default : 0 dB)
o R Ch Level
Adjust the right channel output level.
-12 dB – +12 dB (Default : 0 dB)
o Volume Level
Set the volume output level.
Variable
(Default):
Volume can be adjusted.
1 – 98
(–79 dB – 18 dB):
Volume is fixed at the desired level. The
volume cannot be adjusting using the
remote control unit.
0
The dB value is displayed when the “Scale” setting is “ –79.5 dB – 18.0 dB”.
( v p. 159)
o Volume Limit
Make a setting for maximum volume.
60 – 80 (–20 dB – 0 dB)
(Default : 70 (-10 dB))
Off:
Do not set a maximum volume.
0
This can be set when “Volume Level” is set to “Variable”. ( v p. 213)
0
The dB value is displayed when the “Scale” setting is “-79.5 dB - 18.0 dB”.
( v p. 159)
Contents Connections Playback Settings Tips Appendix
213
Front panel Display Rear panel Remote Index