Furuno FSV-84 - Manual (Page 44)

2-16
Power
To Hull Unit
(cable 10S2078)
To Processor Unit
(cable 10S1258-1)
TB-B101
CN-B101
CN-B102
Satellite Compass
TB-B10
Cable
No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Clamp for transducer cables
Fasten shield with
steel clamp.
P1
(64 pin)
P2
(64 pin)
Arrange transducer cables as shown above and
fix them with clamp.
TRX-16
TRX-1
Fix cables
by clamps.
Fix cables
by clamps.
Transceiver unit, inside view
Connect transducer cable (cables from transducer or cables from Junction Box FSV-845)
referring to cable no. labeled on the chassis and connector no. labeled on each pc board.
Connector is locked properly when you hear a “click” sound. For the cable (10S2078) from
the control box of the hull unit connect the longer peeled portion of the cable to the
transceiver unit.
Note: When removing or inserting TRX board when the transducer cable is not connected,
lock the connector lock of the transducer cable connector (HIF connector).