Furuno FSV-84 - Manual (Page 53)

3-5
MENU QUIT
QUIT OTHERS
QUIT
CANCEL
LANGUAGE : English
HEADING ADJUST1 : 0
°
HEADING ADJUST2 : 0
°
PROPELLER DIREC : -180
°
ES2 SELECT : ES
ES DRAFT OFFSET : 0.0m
EVENT KEY : EVENT
AUTO TILT : NARROW
SELECT USER PROG :H/V INTERLOCK
TRACKBALL SPEED : NORMAL
HULL UNIT STROKE : 1100m
OTHERS menu, HEADING ADJUST
6. Choose
▲ or ▼ to choose direction (plus or minus, respectively) in which to increment
or decrement setting and then press the [MENU] key to set. Each pressing of the
[MENU] key changes the setting in increments of 1
°. The setting range is -180° to +179°.
7. Choose QUIT to finish the adjustment and press the [MENU] key.
8. Choose QUIT at the top of the menu screen and press the [MENU] key to close all
menus.
Heading adjustment for motion sensor
HEADING ADJUST2 (on the SYSTEM menu) is used for heading adjustment of motion
sensor. Adjust the heading according to type of motion sensor connected, referring to the
guidelines below.
•
If the standard motion sensor is used where the hull unit and control box are installed
together, use the same value as set for HEADING ADJUST1.
•
If the control box is installed separately, set angle measured from bow. The angle is 0
degrees if the lid of the control box is directed toward ship’s stern precisely.
•
If GPS gyro is selected as motion sensor, set 0 degrees.