FUJITSU ServerView Respurce Orchestrator Virtual Edition V3.1.0 - Manual (Page 198)

Member Port
When the name of a port with link aggregation is displayed for the port name, the port names of the physical port with link
aggregation are displayed separated by commas (",").
When the physical port name is displayed as the port name, a hyphen ("-") is displayed.
Link Status
The operational status of the port is displayed.
One of the following is displayed:
- up
- down
- unknown
Speed/DuplexMode
The speed and duplex mode of the operating port are displayed.
Link Aggregation Group
The name of the link aggregation group to which the port of the selected LAN switch belongs.
If it does not belong to link aggregation, a hyphen ("-") is displayed.
Link aggregation information
The following information is only displayed when LAN switch blades (*) are selected.
Link aggregation group name
The name of the link aggregation group to which the port of the selected LAN switch blade belongs is displayed.
Port name
The link aggregation port name is displayed.
- For PY-SWB104 (PG-SW109)
LAG/Link aggregation group number
- For PY-SWB101 (PG-SW201) or PY-SWB102(PG-SW111)
Logical port number of the LAG/port channel
Member port:Link status
The physical port names and the link status (up or down) of the physical ports are displayed for the ports in the link aggregation.
VLAN
VLAN ID
A list of VLAN IDs set in the selected LAN switch is displayed.
Untagged Port(s)
A list of ports set with a port VLAN ID is displayed.
The logical port for link aggregation is only displayed for LAN switch blades (*).
Tagged Port(s)
A list of ports set with tagged VLAN ID(s) is displayed.
The logical port for link aggregation is only displayed for LAN switch blades (*).
* Note: The following LAN switch blades are included:
- PY CB Eth Switch/IBP 10Gb 18/8
- PY CB Eth Switch/IBP 1Gb 36/8+2
- 183 -