FUJITSU ServerView Respurce Orchestrator Virtual Edition V3.1.0 - Manual (Page 212)

login_name
Enter the name of a VIOM user account.
When specifying a domain, use the following syntax: "
domain_name \ user_name ".
login_passwd
Enter the password of the above VIOM user account.
passwd_enc
Enter one of the following.
- If login_passwd is plain text
"plain"
- If the password is encrypted
"encrypted"
Chassis Data
- Section Name
Enter [Chassis] as the section name.
- Section Header
operation
Enter the desired operation for the current line. Enter a hyphen ("-") to skip this line.
chassis_name
Enter the name that will be used to identify the chassis.
Enter a character string beginning with an alphabetical character and containing up to 10 alphanumeric characters and hyphens
("-").
Note
Chassis names should be unique between all chassis. Names are not case-sensitive.
ip_address
Enter the same IP address as that set on the management blade.
Enter a string of numeric values (between 0 and 255) and periods.
Note
IP addresses should be unique between all resources.
snmp_community_name
Enter the same SNMP community (read-write permission) as that set on the management blade.
Enter a string of up to 32 alphanumeric characters, underscores ("_"), and hyphens ("-").
PRIMEQUEST Chassis Management Data
- Section Name
Enter [PRIMERGYPartitionModelChassis] as the section name.
- 197 -