FUJITSU ServerView Respurce Orchestrator Virtual Edition V3.1.0 - Manual (Page 200)

Firmware version
The firmware version of the device (PDU or UPS) is displayed.
Date of manufacture
The date of manufacture of the PDU or UPS is displayed.
Outlets
The number of outlets provided by the PDU is displayed.
This is not displayed for UPSs.
Intended orientation
The intended orientation (horizontal or vertical) of the PDU is displayed.
This is not displayed for UPSs.
A.6.6 Management Software Attributes
General Area
Management software name
The name used to identify the management software is displayed.
Type
The type of the management software is displayed.
One of the following is displayed:
- vCenter Server
- SCVMM
- VIOM
IP address
The IP address used to connect to the management software is displayed.
Status
The status of the management software is displayed.
Management software
A link to the web interface of the management software is displayed.
A.7 [Recovery Settings] Tab
The [Recovery Settings] tab displays a list of spare servers assigned to the resource selected in the server resource tree.
The table below shows the information displayed in the [Recovery Settings] tab.
[Recovery Settings] Tab
Server Name
The name used to identify a physical OS or VM host is displayed.
Admin LAN IP Address
The IP address on the admin LAN is displayed.
Primary Server
The name of the server on which the physical OS or VM host is operating is displayed.
- 185 -