Marathon MAGNUM ROUTER - Manual (Page 163)

Chapter 12: Marathon Port Configuration
___________________________________________________________________
Async Channel Configuration Example
NOTE: Bolded text items are fields that need to be changed in order for Marathon Matrix
switching to work.
ASYNC CHANNEL CHARACTERISTICS [TOP/ A04]
1. DATA RATE
[9600]
2. CODE LEVEL [8]
3. PARITY [NONE]
4. STOP BITS [1]
5. ECHO [OFF]
6. CHANNEL END TO HOST/TO TERMINAL [TERMINAL]
7. XON CHARACTER [DC1]
8. XOFF CHARACTER [DC3]
9. BUFFER CONTROL [XON/XOFF]
10. FLOW CONTROL [XON/XOFF]
11. CR DELAY [ 0]
12. LF DELAY [ 0]
13. FF DELAY [ 0]
ASYNC CHANNEL FEATURES [TOP/ A04]
1. PRIORITY
[HIGH]
2. EIA CONTROL [ENABLE]
3. SMOOTH SCROLL [ON]
4. TANDEM [NO]
5. FLOW CONTROL STRIP [STRIP]
6. HP ENQ/ACK [NO]
7. SYNC LOSS DISCONNECT [NO]
8. COMMAND MODE ENTRY SEQUENCE [^X BREAK]
9. COMMAND MODE ACCESS [DISABLE]
10. COMMAND FACILITY MAIN MENU ACCESS [DISABLE]
11. LOCAL CHANNEL CONFIGURATION [DISABLE]
ASYNC CHANNEL EXTENDED FEATURES [TOP/ A04]
1. DATA COMPRESSION
[ENABLE]
2. REMOTE CTS CONTROL [FORCED ON]
ASYNC CHANNEL SWITCHING PARAMETERS [TOP/ A04]
1. CONNECT PROTOCOL
[DEDICATED]
2. UNBALANCED RATES [ON]
3. CALL INHIBIT [YES]
4. RECEIVE INHIBIT [NO]
5. CHARACTER SET [ASCII]
6. MATRIX SWITCHING [ENABLE]
7. RESOURCE CLASS
8. DESTINATION NODE/CLASS
9. CHANNEL PASSWORD
12-2