Marathon MAGNUM ROUTER - Manual (Page 57)

Chapter 7: Magnum Router GUI Manager
___________________________________________________________________
7-12
WAN-IP Route Map
The WAN IP Route Map screen is only available via the WAN Configuration screen.
The next step will be to fill data into the WAN-IP Route Map screen. The purpose of the WAN-
IP Route Map is to set the destination network address with its corresponding DLCI number,
port number and associated gateway (a.k.a. next hop IP address).
Add a NEW WAN entry
into the configuration
Delete a WAN entry
from the configuration
Save changes to the
Magnum Router
Manager
Exit this screen to the
Main Screen
Enter additional routes
Port number assigned
for this route
DLCI Number assigned
to this route
Destination IP
NETW ORK address
and subnet mask of the
remote site
Address of the "Next
Hop" router
Add documentation
notes for each entry
Figure 19 - WAN-IP Route Map Screen