Sanyo DSR-3706PA - Manual (Page 15)

English
Preparing for use
How to use 14
The operation display shows information necessary for
operation, such as the date, time and video quality. The
operation display can be hidden.
1 Date display
01-01-06 (day, month, year): Do not forget to set the date
using the menu settings when turning the power on for the
first time.
2 Time display
00:00:00: Do not forget to set the time using the menu
settings when turning the power on for the first time.
3 Operation symbols
The operation symbols are displayed during recording and
control operations.
4 Remaining recording area (P46)
It is displayed only during normal and alarm recording.
1% ~ 100%:
If overwrite is not permitted on the hard disk, it displays
the remaining area as a percentage.
REPEAT:
Repeatedly overwrites the video on the hard disk.
5 Image quality display
The image quality display indicates the quality of the video
recorded on the hard disk.
BA (Basic): Rough image quality, approx. 15kB
NO (Normal): Standard image quality, approx. 22kB
EN (Enhanced): Enhanced image quality, approx. 30kB
FI (Fine): Fine image quality, approx. 42kB
SF (Super Fine): Super fine image quality, approx. 50kB
6 Audio recording indicator
(P49: 2 AUDIO RECORDING)
Displayed when audio recording is performed.
7 Recording type
• ALARM: Alarm playback or standby is in progress
• ALARM (Blinking): Alarm recording is in progress
• PRE: Pre-alarm playback or standby is in progress
• ARCHIV: Archive playback is in progress
8 Alarm total
The alarm total indicates the total number of alarms.
9 Camera title
• 01~06:
First it displays the camera number. The camera
number can be replaced with a name such as the
camera's location.
• VIDEO LOSS:
The display alternates between this message and the
camera number when the camera video is lost.
When the operations display of the monitor is hidden
the message blinks in the same position.
• NO VIDEO:
It is displayed in place of the camera number if there is
no video signal connected to the video input terminal.
F Alarm type
• EA: The display alternates between this message and
the camera title when an external alarm signal is
detected.
• SA: The display alternates between this message and
the camera title when a motion sensor alarm signal
is detected.
• ES: The display alternates between this message and
the camera title when an external alarm signal and
a motion sensor signal are detected.
Operation display
0
02
1 2 3 4 5 6 7 8
F9
01-01-06 00:00:00 REC REPEAT EN A ALARM 0000
Changing the position of the operation display
Whenever the EXIT/OSD button is pressed, the position of
the operation display changes.
02 02
EXIT/OSD
(Hidden)
REC: Recording
EXT: External timer
recording
: Reverse playback
: Still
: Fast-forward playback
: Fast-reverse playback
: Slow playback
: Reverse slow playback
: Playback (including simultaneous recording and
playback)