Sanyo DSR-3706PA - Manual (Page 58)

English
Recording settings
57 How to set
1 Display the <ALARM REC MODE SET> screen as
explained in "Displaying the recording settings
screen", and then turn the S-dial clockwise. (P39)
The "OFF" field of ALARM RECORDING starts
blinking.
2 Set the pre-alarm recording.
1 Turn the J-dial to select "ENABLED" for ALARM
RECORDING, and then turn the S-dial clockwise.
The "***" field of the PRE-ALARM RECORDING
switches to "OFF".
2 Turn the J-dial to select "PRE-ALARM
RECORDING", and then turn the S-dial
clockwise.
The "OFF" indicator of PRE-ALARM RECORDING
starts blinking.
3 Turn the J-dial, turn "ON" the PRE-ALARM
RECORDING, and then turn the S-dial clockwise.
The "****" displayed at the REC RATE and
DURATION fields changes to numbers, and a
<WARNING> screen is displayed, with "NO"
blinking.
4 Turn the J-dial, select "YES", and turn the S-dial
clockwise.
The cursor moves to "REC RATE".
5 Turn the S-dial clockwise.
6 Turn the J-dial to select the REC RATE (example:
8.333), and then turn the S-dial clockwise.
Repeat the same procedure to set the DURATION
(example: 20SEC).
After the arrow symbol (=>) the number of alarms
that can be recorded is displayed.
3 Press the EXIT/OSD button.
"PRE" appears in the operation display area.
When an alarm is detected, the "ALARM" field starts
blinking.
1 Turn the J-dial to the select ALARM TRIGGER
selections and turn the S-dial clockwise.
The "ALARM" starts blinking.
Selections:
ALARM/SENSOR/ALARM AND SENSOR/ALARM OR
SENSOR
2 Turn the J-dial, select "ALARM". Then turn the
S-dial clockwise.
The cursor moves back to the ALARM RECORDING
field.
3 Press the EXIT/OSD button.
b Input signals used as external alarms
The signals that can be used as alarms are of two types:
signals detected at the ALARM IN terminal switches, and
alarm signals superimposed on the coaxial signals coming
from cameras.
G-2 Pre-alarm recording settings
MENU
(J) (S)
<ALARM REC MODE SET>
ALARM RECORDING : OFF
PICTURE QUALITY : ENHANCED
AUDIO RECORDING : OFF
ALARM INTERLEAVE : ONLY
REC RATE: 12.5FPS, DURATION: 20SEC
PRE-ALARM RECORDING : OFF
REC RATE: **** FPS, DURATION: ****
=> (01731 ALARMS CAN BE RECORDED)
ALARM TRIGGER : ALARM
MOTION SENSOR ->
7.ALARM REC MODE SET
2.RECORD SET
<MAIN MENU>
<RECORD SET>
PRE-ALARM RECORDING : OFF
REC RATE: A 12.5FPS, DURATION: 1MIN
<WARNING>
REC RATE SETTING IN THE MENU WILL BE
AUTOMATICALLY ADJUSTED.
ARE YOU SURE ?
NO
G-3 Alarm trigger setting
REC RATE: A 8.333FPS, DURATION: 20SEC
=> (00694 ALARMS CAN BE RECORDED)
02
01-01-06 00:00:00 REC REPEAT EN A PRE 0000
EXIT/OSD Alarm total
PRE indicator
ALARM TRIGGER : ALARM
EXIT/OSD