Lynx Professional Grills 42" Free Standing Grill L42PSR-1 - Manual (Page 31)

1
eleCtriCAl Conne CA CA Ctions
warning - eleCtrICal groundIng
Product installation must meet local electric codes or, in the absence of local codes, the latest
edition of the national electrical Code Ansi/nfPA no. 70 or the Canadian electrical Code
CgA 1.6b2005.
use only a ground fault interrupter (gfi) protected circuit with this outdoor cooking gas ap-
pliance.
ImPortant: when connecting your rotisserie motor, first connect the motor to the grill and
then plug the grill into the outlet.
This grill is equipped with a three prong (grounding) electric plug for your protection against
shock hazard and must be plugged directly into a properly grounded three prong outlet.
This grill is equipped with a three prong (grounding) electric plug for your protection against This grill is equipped with a three prong (grounding) electric plug for your protection against
nEvER cut or remove the grounding prong from this plug.
shock hazard and must be plugged directly into a properly grounded three prong outlet. shock hazard and must be plugged directly into a properly grounded three prong outlet.
Use only extension cords with a  prong grounding plug, rated for the power of the equip-
ment, and approved for outdoor use with a “
Use only extension cor Use only extension cor prong grounding plug, rated for the power of the equip prong grounding plug, rated for the power of the equip
w-A” marking.
prong grounding plug, rated for the power of the equip prong grounding plug, rated for the power of the equip
To protect against electric shock, do not immerse any part of the power cord, an extension
cord or any plugs in water or other liquid.
To protect against electric shock, do not immerse any part of the power cord, an extension To protect against electric shock, do not immerse any part of the power cord, an extension
Unplug the product from the outlet when not in use and before cleaning. Allow it to cool
before putting on or taking off parts.
Unplug the product from the outlet when not in use and before cleaning. Allow it to cool Unplug the product from the outlet when not in use and before cleaning. Allow it to cool
do not let the cord hang over the edge of a table or touch hot surfaces.
do not use an outdoor cooking gas appliance for purposes other than intended.
do not operate any outdoor cooking gas appliance with a damaged cord, plug, or after the
appliance malfunctions or has been damaged in any manner.
o not operate any outdoor cooking gas appliance with a damaged cord, plug, or after the o not operate any outdoor cooking gas appliance with a damaged cord, plug, or after the
c
o not operate any outdoor cooking gas appliance with a damaged cord, plug, or after the o not operate any outdoor cooking gas appliance with a damaged cord, plug, or after the
ontact the manufacturer for
o not operate any outdoor cooking gas appliance with a damaged cord, plug, or after the o not operate any outdoor cooking gas appliance with a damaged cord, plug, or after the
repair.
►
►
►
►
►
►
►
►
►
►
Installation requires an
outdoor 120
Installation requires an Installation requires an
vAC 15A
Installation requires an Installation requires an
v v gfi
Installation requires an Installation requires an
(ground fault interrupter)
electrical outlet adjacent to
nterrupter) nterrupter)
the grill.
The gfi outlet features an
internal breaker that reduces
shock hazard. This type of
outlet should be installed by
a qualified electrician either
outlet should be installed by outlet should be installed by
inside the island enclosure
a qualified electrician either a qualified electrician either
for built-in units, or near the
location where a free-standing
unit will be used.
for built-in grills, the supplied
1v
or built-in grills, the supplied or built-in grills, the supplied
transformer is connected
or built-in grills, the supplied or built-in grills, the supplied
v v
or built-in grills, the supplied or built-in grills, the supplied or built-in grills, the supplied or built-in grills, the supplied
to the grill during installation.
If the electrical system fails to
operate, a connection may
have come loose in shipping
operate, a connection may operate, a connection may
or the
have come loose in shipping have come loose in shipping
gfi
have come loose in shipping have come loose in shipping
may have tripped,
have come loose in shipping have come loose in shipping
requiring a reset. See the
may have tripped, may have tripped,
Troubleshooting section for
requiring a reset. See the requiring a reset. See the
more details.
ConneCTion To AC