National Instruments NI 6014 - Manual (Page 78)

Appendix A Specifications
© National Instruments Corporation A-9 NI 6013/6014 User Manual
Maximum Working Voltage
Maximum working voltage refers to the signal voltage plus the
common-mode voltage.
Channel-to-earth..................................... ±11 V, Installation Category II
Environmental
Operating temperature............................ 0 to 50 °C
Storage temperature ............................... –20 to 70 °C
Humidity ................................................ 10 to 70% RH, noncondensing
Maximum altitude .................................. 2,000 meters
Pollution Degree (indoor use only) ........ 2
Safety
The NI 6013/6014 meets the requirements of the following standards for
safety and electrical equipment for measurement, control, and laboratory
use:
• EN 61010-1:1993/A2:1995, IEC 61010-1:1990/A2:1995
• UL 3101-1:1993, UL 3111-1:1994, UL 3121:1998
• CAN/CSA c22.2 no. 1010.1:1992/A2:1997
Electromagnetic Compatibility
CE, C-Tick, and FCC Part 15 (Class A) Compliant
Electrical emissions................................ EN 55011 Class A at 10 m
FCC Part 15A above 1 GHz
Electrical immunity................................ Evaluated to EN 61326:1998,
Table 1
Note For full EMC compliance, you must operate this device with shielded cabling.
In addition, all covers and filler panels must be installed. Refer to the DoC for this product
for any additional regulatory compliance information. To obtain the DoC for this product,
click Declaration of Conformity at
ni.com/hardref.nsf/ . This Web site lists the
DoCs by product family. Select the appropriate product family, followed by the product,
and a link to the DoC appears in Adobe Acrobat format. Click the Acrobat icon to
download or read the DoC.