Tektronix Phaser 600 - Manual (Page 624)

S Y M P T O M S A N D S O L U T I O N S
6 0 7
If you can’t print
from Windows to
an LPT port
(cont’d.) Windows 95
1. Select Start in the taskbar on your screen.
2. In the menu that appears, select Settings .
3. In the next menu, select Printers ; the Printers window appears.
4. Click on your printer’s icon and select Properties from the File menu.
5. Click the Details tab.
6. Click Add Port .
7. Click Other .
8. Make sure that Local Port is highlighted, then click OK .
9. Type LPTx.DOS (where x is 1, 2, or 3).
10. Click OK .
11. In the Details tab, the Print to the following port should be LPT.DOS
(unknown local port).
If you can’t make a print (cont'd.)
Symptom Solution